A lot of S1-S' dont have a leading edge support tube. I ordered the tubes for an S1-T from Aviat."OUCH" 200$ plus each" I'll make some duplicates out of Streamline tubing before I mount the factory ones. I welded a roid onto the stab. I installed a flat strap just in front of the flying wire mount on the lower part of the fuse.It's not quite as clean as the Steen mount but it' will work just as well.I have been warned not to snap my flying plane real hard as it does not have this upgrade yet. the photo shows the roid just MIG tacked in.
No comments:
Post a Comment